Filter
Top Products
Viewing System Information
280 AlterPath KVM/net Installation, Administration, and User’s Guide
T To View Station Status
1. In Expert mode, go to: Information>Station Status.
The Station Status form appears.
Figure 4-45:KVM Station Status Information Form
The following table describes the information displayed for each station on
the Station Status form.
Table 4-15: Station Status Information
Field Information
Station
Displays whether the station is Local, Remote,
or Inactive and lists the microcontroller version
used. This field also displays whether the
KVM/net is a Master or Slave and lists the
model number of the master KVM/net.
Connection Mode
Displays whether the connection is Network or
Physical or if the system is Trying to connect
(if the cable is disconnected).
Mode
Displays whether the configured port is on the
master or slave.
Current Status
Displays the name of the current active page for
that session.