Filter
Top Products
Installing the AlterPath KVM Expander
122 AlterPath KVM/net Installation, Administration, and User’s Guide
T
To Mount the KVM Expander
1. Connect the two supplied brackets to the KVM Expander, connecting one
bracket to each side of the box.
a. Decide whether you need to mount the KVM Expander by the front or
back and locate the appropriate sets of holes on the KVM Expander.
The following figure shows the angle of a bracket being installed for
rack mounting.
The following figure shows the angle of a bracket being installed for
wall mounting.
b. For each bracket, insert a screw through each of the three holes on the
bracket into the appropriate holes at either the front or back of the
KVM Expander.
The following figure shows the brackets as they appear from the side
and front of the KVM Expander after the brackets are installed for rack
mounting.
Holes for
back mounting
KVM Expander side
Holes for
front mounting
Bracket
Holes for wall mounting
Bracket