Filter
Top Products
Web Manager for Administrators 243
Configuration
T To Add a Chain for IP Filtering
1. In Expert mode go to: Configuration>Network>IP Filtering.
The IP Filtering configuration form appears.
Each line in the list box represents a chain. For a definition or explanation
of the field columns, refer to the introductory section of this procedure or
to the field definitions for the Edit Rule dialog box, next section.
2. To add a chain, select the Add button.
The Add Chain dialog box appears.
3. Enter the name of the chain that you are adding to the filter table, and then
select OK. (Spaces are not allowed in the chain name.)
4. After entering a new chain name, click on the Edit Rules button to enter
the rules for that chain.