Filter
Top Products
Web Manager for Administrators 267
Configuration
T To Configure the AUX Port for Use With an
IPDU or an External Modem
1. In Expert mode, go to: Configuration>AUX Port.
The Aux Port form appears.
2. To configure the AUX Portfor Power Management, make sure that Power
Management is selected in the Profile drop-down list. Note that the Aux
port is enabled by default.
3. Click “apply changes.”
See “Power Management” on page 40 for background information on power
management and lists of related tasks.
4. To configure the AUX Port for an external modem, make sure that PPP is
selected in the Profile drop-down list.
Additional fields appear on the form.
5. Complete the fields as shown below.
Table 4-13: PPP Fields for Configuring the AUX Port
Field Name Definition
Baud Rate
The port speed.
Flow Control
Gateway or interface address used for the
route.
Data Size
The number of data bits.
Parity
None, even or odd.