Filter
Top Products
Installation 103
Enabling Access to the Web Manager without Making a Direct Connection
See “To Connect to the Console Port” on page 82 for instructions if
needed.
b. Execute the command
Output similar to the following will appear. The line in bold type face
labelled “inet address” lists the IP address of the KVM/net:
5. To obtain the KVM/net’s current IP address from the DHCP server, supply
the MAC address from the bottom side of the KVM/net’s chassis. (The
address has the form: NN-NN-NN-NN-NN-NN, as in this example: 00-60-
3D-01-36-B4.)
6. Finish configuring KVM/net users and ports using the Web Manager.
ifconfig eth0
eth0 Link encap:Ethernet HWaddr
00:60:2E:01:4F:FC
inet addr:192.168.50.72
Bcast:192.168.51.255
Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST
MTU:1500 Metric:1
RX packets:7282803 errors:43
dropped:0 overruns:0 frame:43
TX packets:167335 errors:3
dropped:0 overruns:0 carrier:3
collisions:0 txqueuelen:100
RX bytes:539070845 (514.0 MiB) TX
bytes:18911603 (18.0 MiB
Base address:0xe00