Filter
Top Products
1.11 Kerio WebMail configuration
119
Message writing
Use this tab to set some of the parameters for message sending.
Figure 1.119 User settings — Mail composing tab
Compose messages in HTML format
This option is checked by default. The message text cannot be formatted, if the message
is not composed in HTML format (see chapter 1.5.5). This setting applies to all messages.
Messages can be also composed in HTML format (or in the plain text format) by default
and you can use the other alternative only when needed. To specify this setting for
a selected message, use the Options dialog in the message editor (see chapter
1.5.5). This
applies only to the selected message; the default settings are not changed.
Warning: In Safari, it is not possible to compose HTML messages. Therefore, the Compose
messages in HTML format option is missing for this browser.
Add original text when replying
Use this option, if you want to include the original message in your reply. You can also
select the character that will appear before each line of the original message. These
characters are used to differentiate graphically the original message from the reply.
The line wrap function facilitates the reading of messages. The value of 76 characters is
set as default. If the value is set to 0, the text will not be wrapped.