Filter
Top Products
4.3 Windows Mobile 2003 and 2003 Second Edition
179
Click on Peak Times to open a dialog (see figure 4.17), where intervals for peak time
can be set.
Figure 4.17 ActiveSync — synchronization peak times
9. Save the settings by the Ok button. To test whether the settings allow proper functionality,
use the Sync button in the ActiveSync main window. This button can be used for manual
synchronization whenever needed.
4.3.2 ActiveSync settings in Smartphone Edition
It is not necessary to install the ActiveSync application since it is included in the Windows
Mobile operating system (it can be found under Start → ActiveSync).
Before the starting to configurate, it is necessary to check if connection of the device to net-
work is set correctly (required for connection to the mailserver). This can be tested for example
by using Internet Explorer to connect to Kerio WebMail (see chapter 1.2).
If the connection does not fail, you can start to set ActiveSync:
1. Open the Start menu and run ActiveSync (see figure 4.18).
Figure 4.18 The Start menu