Filter
Top Products
16-bit Timers
11-9
Timer 10 mode register
Register symbol: TM10MD
Address: x'34001080
Purpose: This register controls the operation of timer 10.
Bit No.1514131211109876543210
Bit TM10 TM10 TM10 TM10 TM10
–––
TM10 TM10
–
TM10
–
TM10 TM10 TM10
name CNE LDE PME PM1 PM0 TGE ONE CAE CK2 CK1 CK0
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Access R/W R/W R/W R/W R/W R R R R/W R/W R R/W R R/W R/W R/W
Bit No. Bit name Description
0 TM10CK0 Timer 10 clock source selection flag (LSB)
1 TM10CK1 Timer 10 clock source selection flag
2 TM10CK2 Timer 10 clock source selection flag (MSB)
These bits select the clock source for timer 10.
When pin input is selected, counting occurs at the rising edge of the pin input.
Note : For details on the clock sources for each timer, refer to Table 11-5-2, "16-bit
Timer Clock Sources."
3 — "0" is returned when this bit is read.
4 TM10CAE Counter clear enable flag
Enables/disables clearing of TM10BC when TM10BC and TM10CA match.
0: Do not clear. (TM10BC becomes a 16-bit free-running counter.)
1: Clear.
When TM10CA is set as a compare register;
TM10BC is cleared if TM10BC and TM10CA match.
When TM10CA is set as a capture register;
TM10BC is cleared when a capture occurs in TM10CA.
5 — "0" is returned when this bit is read.
6 TM10ONE One-shot operation enable flag
Enables/disables the halt of timer operation when TM10BC and TM10CA match.
0: Disables one-shot operation.
1: Enables one-shot operation.
If TM10BC and TM10CA match, the TM10CNE flag is reset and the timer
stops.