Filter
Top Products
ZyWALL USG 300 User’s Guide
115
CHAPTER 7
Tutorials
Here are examples of using the Web Configurator to set up features in the
ZyWALL. See also Chapter 8 on page 183 for an example of configuring L2TP VPN.
Note: The tutorials featured here require a basic understanding of connecting to
and using the Web Configurator, see Chapter 3 on page 47 for details. For field
descriptions of individual screens, see Technical Reference on page 219.
7.1 How to Configure Interfaces, Port Grouping,
and Zones
This tutorial shows how to configure Ethernet interfaces, port grouping, and zones
for the following example configuration (see Section 6.2.2 on page 94 for the
default configuration).
•Interface ge2 uses a static IP address of 1.2.3.4 and is in the WAN zone.
• DMZ servers are connected to ports P4 and P5 and need full wire speed
communication with each other, so ports P4 and P5 are combined into a ge4
interface port group. It uses IP address 192.168.2.1.