Filter
Top Products
Chapter 14 Trunks
ZyWALL USG 300 User’s Guide
368
14.2 The Trunk Summary Screen
Click Configuration > Network > Interface > Trunk to open the Trunk
screen. This screen lists the configured trunks and the load balancing algorithm
that each is configured to use.
Figure 294 Configuration > Network > Interface > Trunk
The following table describes the items in this screen.
Table 87 Configuration > Network > Interface > Trunk
LABEL DESCRIPTION
Show Advance
Settings / Hide
Advance Settings
Click this button to display a greater or lesser number of configuration
fields.
Enable Link
Sticking
Enable link sticking to have the ZyWALL route sessions from one
source to the same destination through the same link for a period of
time. This is useful for accessing servers that are incompatible with a
user's sessions coming from different links.
For example, this is useful when a server requires authentication. See
Link Sticking on page 364 for an example.
This setting applies when you use load balancing and have multiple
WAN interfaces set to active mode.
Timeout Specify the time period during which sessions from one source to the
same destination are to use the same link.