Filter
Top Products
Chapter 35 ADP
ZyWALL USG 300 User’s Guide
626
35.3 The Profile Summary Screen
Use this screen to:
• Create a new profile using an existing base profile
• Edit an existing profile
• Delete an existing profile
From, To This is the direction of travel of packets to which an anomaly profile
is bound. Traffic direction is defined by the zone the traffic is coming
from and the zone the traffic is going to.
Use the From field to specify the zone from which the traffic is
coming. Select ZyWALL to specify traffic coming from the ZyWALL
itself.
Use the To field to specify the zone to which the traffic is going.
Select ZyWALL to specify traffic destined for the ZyWALL itself.
From LAN To LAN means packets traveling from a computer on one
LAN subnet to a computer on another LAN subnet via the ZyWALL’s
LAN zone interfaces. The ZyWALL does not check packets traveling
from a LAN computer to another LAN computer on the same subnet.
From WAN To WAN means packets that come in from the WAN
zone and the ZyWALL routes back out through the WAN zone.
Note: Depending on your network topology and traffic load,
applying every packet direction to an anomaly profile may
affect the ZyWALL’s performance.
Anomaly Profile An anomaly profile is a set of anomaly rules with configured
activation, log and action settings. This field shows which anomaly
profile is bound to which traffic direction. Select an ADP profile to
apply to the entry’s traffic direction. Configure the ADP profiles in the
ADP profile screens.
Apply Click Apply to save your changes.
Reset Click Reset to return the screen to its last-saved settings.
Table 169 Configuration > Anti-X > ADP > General (continued)
LABEL DESCRIPTION