Filter
Top Products
Appendix A Log Descriptions
ZyWALL USG 300 User’s Guide
970
Invalid OSPF virtual-
link %s authentication
of area %s.
Virtual-link %s authentication has been set to same-as-area
but the area has invalid authentication configuration. %s:
Virtual-Link ID
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF md5 authentication is set on interface %s. %s:
Interface Name
Invalid OSPF text
authentication on
interface %s.
Invalid OSPF text authentication is set on interface %s. %s:
Interface Name
Interface %s does not
belong to any OSPF
area.
Interface %s has been set OSPF authentication same-as-
area, however the interface does not belong to any OSPF
area. %s: Interface Name
Invalid OSPF
authentication of area
%s on interface %s.
Interface %s has been set OSPF authentication same-as-
area, however the area has invalid text authentication
configuration. %s: Interface Name
Table 290 NAT Logs
LOG MESSAGE DESCRIPTION
The NAT range is full The NAT mapping table is full.
%s FTP ALG has
succeeded.
The FTP Application Layer Gateway (ALG) has been turned on
or off.
%s: Enable or Disable
Extra signal port of
FTP ALG has been
modified.
Extra FTP ALG port has been changed.
Signal port of FTP ALG
has been modified.
Default FTP ALG port has been changed.
%s H.323 ALG has
succeeded.
The H.323 ALG has been turned on or off. %s: Enable or
Disable
Extra signal port of
H.323 ALG has been
modified.
Extra H.323 ALG port has been changed.
Signal port of H.323
ALG has been modified.
Default H.323 ALG port has been changed.
%s SIP ALG has
succeeded.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra signal port of
SIP ALG has been
modified.
Extra SIP ALG port has been changed.
Signal port of SIP ALG
has been modified.
Default SIP ALG port has been changed.
Register SIP ALG extra
port=%d failed.
SIP ALG apply additional signal port failed.
%d: Port number
Table 289 Routing Protocol Logs (continued)
LOG MESSAGE DESCRIPTION