Filter
Top Products
Chapter 25 IPSec VPN
ZyWALL USG 300 User’s Guide
498
the longer it takes to encrypt and decrypt information. For example, DH2 keys
(1024 bits) are more secure than DH1 keys (768 bits), but DH2 keys take longer
to encrypt and decrypt.
Authentication
Before the ZyWALL and remote IPSec router establish an IKE SA, they have to
verify each other’s identity. This process is based on pre-shared keys and router
identities.
In main mode, the ZyWALL and remote IPSec router authenticate each other in
steps 5 and 6, as illustrated below. The identities are also encrypted using the
encryption algorithm and encryption key the ZyWALL and remote IPSec router
selected in previous steps.
Figure 363 IKE SA: Main Negotiation Mode, Steps 5 - 6: Authentication (continued)
You have to create (and distribute) a pre-shared key. The ZyWALL and remote
IPSec router use it in the authentication process, though it is not actually
transmitted or exchanged.
Note: The ZyWALL and the remote IPSec router must use the same pre-shared key.
3
4
X
Y
Step 5:
pre-shared key
ZyWALL identity, consisting of
- ID type
- content
Step 6:
pre-shared key
Remote IPSec router identity, consisting of
- ID type
- content
5
6
X
Y