Filter
Top Products
Chapter 7 Tutorials
ZyWALL USG 300 User’s Guide
180
4 Set the Device Role to Backup. Activate monitoring for the ge1 and ge2
interfaces. Set the Synchronization Server Address to 192.168.1.1, the Port
to 21, and the Password to “mySyncPassword”. Select Auto Synchronize and
set the Interval to 60. Click Apply.
Figure 149 Configuration > Device HA > Active-Passive Mode: Backup ZyWALL
Example
5 Click the General tab. Turn on device HA and click Apply.
Figure 150 Configuration > Device HA > General: Master ZyWALL Example