Filter
Top Products
Appendix A Log Descriptions
ZyWALL USG 300 User’s Guide
981
ERROR:#%s, %s Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s Run script failed, this log will be what wrong CLI command is
and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system... Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration
file.
%s is configuration file name.
Running %s... An administrator ran the listed shell script.
%s is script file name.
Table 298 DHCP Logs
LOG MESSAGE DESCRIPTION
Can't find any lease for
this client - %s, DHCP
pool full!
All of the IP addresses in the DHCP pool are already assigned
to DHCP clients, so there is no IP address to give to the listed
DHCP client.
DHCP server offered %s
to %s(%s)
The DHCP server feature gave the listed IP address to the
computer with the listed hostname and MAC address.
Requested %s from
%s(%s)
The ZyWALL received a DHCP request for the specified IP
address from the computer with the listed hostname and MAC
address.
No applicable lease found
for DHCP request - %s !
There is no matching DHCP lease for a DHCP client’s request
for the specified IP address.
DHCP released %s with
%s(%s)
A DHCP client released the specified IP address. The DHCP
client’s hostname and MAC address are listed.
Sending ACK to %s The DHCP server feature received a DHCP client’s inform
packet and is sending an ACK to the client.
DHCP server assigned %s
to %s(%s)
The DHCP server feature assigned a client the IP address that
it requested. The DHCP client’s hostname and MAC address
are listed.
Table 297 File Manager Logs (continued)
LOG MESSAGE DESCRIPTION