Filter
Top Products
Chapter 41 Addresses
ZyWALL USG 300 User’s Guide
735
41.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group
or edit an existing one. To access this screen, go to the Address Group screen
(see Section 41.3 on page 734), and click either the Add icon or an Edit icon.
Figure 496 Configuration > Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 203 Configuration > Object > Address > Address Group > Add
LABEL DESCRIPTION
Name Enter a name for the address group. You may use 1-31 alphanumeric
characters, underscores(_), or dashes (-), but the first character cannot
be a number. This value is case-sensitive.
Description This field displays the description of each address group, if any. You can
use up to 60 characters, punctuation marks, and spaces.
Member List The Member list displays the names of the address and address group
objects that have been added to the address group. The order of
members is not important.
Select items from the Available list that you want to be members and
move them to the Member list. You can double-click a single entry to
move it or use the [Shift] or [Ctrl] key to select multiple entries and use
the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.