Filter
Top Products
Chapter 7 Tutorials
ZyWALL USG 300 User’s Guide
116
• You want to be able to apply security settings specifically for all VPN tunnels so
you create a new VPN zone.
Figure 59 Ethernet Interface, Port Grouping, and Zone Configuration Example
7.1.1 Configure a WAN Ethernet Interface
You need to assign the ZyWALL’s ge2 interface a static IP address of 1.2.3.4.
Click Configuration > Network > Interface > Ethernet and double-click the
ge2 interface’s entry. Select Use Fixed IP Address and configure the IP address,
subnet mask, and default gateway settings and click OK.
Figure 60 Configuration > Network > Interface > Ethernet > Edit ge2
7.1.2 Configure Zones
Do the following to create a VPN zone.