Filter
Top Products
Configuring Spanning Tree Port Parameters Configuring Spanning Tree Parameters
page 5-20 OmniSwitch 6600 Family Network Configuration Guide April 2006
The following is a summary of Spanning Tree port configuration commands. For more information about
these commands, see the OmniSwitch CLI Reference Guide.
Commands Type Used for ...
bridge slot/port Implicit Configuring the port Spanning Tree status for a VLAN
instance when the 1x1 mode is active or the single Span-
ning Tree instance when the flat mode is active.
bridge cist port Explicit Configuring the port Spanning Tree status for the single
flat mode instance.
bridge 1x1 port Explicit Configuring the port Spanning Tree status for a VLAN
instance.
bridge slot/port priority Implicit Configuring the port priority value for a VLAN instance
when the 1x1 mode is active or the single Spanning Tree
instance when the flat mode is active.
bridge cist slot/port priority Explicit Configuring the port priority value for the single flat
mode instance.
bridge msti slot/port priority Explicit Configuring the port priority value for an 802.1s Multi-
ple Spanning Tree Instance (MSTI).
bridge 1x1 slot/port priority Explicit Configuring the port priority value for a VLAN instance.
bridge slot/port path cost Implicit Configuring the port path cost value for a VLAN
instance when the 1x1 mode is active or the single Span-
ning Tree instance when the flat mode is active.
bridge cist slot/port path cost Explicit Configuring the port path cost value for the single flat
mode instance.
bridge msti slot/port path cost Explicit Configuring the port path cost value for an 802.1s Multi-
ple Spanning Tree Instance (MSTI).
bridge 1x1 slot/port path cost Explicit Configuring the port path cost value for a VLAN
instance.
bridge slot/port mode Explicit Configuring the port Spanning Tree mode (dynamic or
manual) for a VLAN instance when the 1x1 mode is
active or the single Spanning Tree instance when the flat
mode is active.
bridge cist slot/port mode Implicit Configuring the port Spanning Tree mode (dynamic or
manual) for the single flat mode instance.
bridge 1x1 slot/port mode Explicit Configuring the port Spanning Tree mode (dynamic or
manual) for a VLAN instance.
bridge slot/port connection Explicit Configuring the port connection type for a VLAN
instance when the 1x1 mode is active or the single Span-
ning Tree instance when the flat mode is active.
bridge cist slot/port connection Implicit Configuring the port connection type for the single flat
mode instance.
bridge 1x1 slot/port connection Explicit Configuring the port connection type for a VLAN
instance.