Alcatel-Lucent 6600 Switch User Manual


 
VLAN Rules Overview Defining VLAN Rules
page 8-10 OmniSwitch 6600 Family Network Configuration Guide April 2006
8. MAC-Port Binding Frame contains a matching source
MAC address and source port.
Frame only contains a matching
source MAC address; port does not
match.
Frame only contains a matching
port; source MAC address does not
match.
Frame source is assigned to the
rule’s VLAN.
Frame is blocked; its source is
not assigned to the rule’s VLAN.
Frame is allowed; its source is
not assigned to the rule’s VLAN.
9. MAC-IP Address Binding Frame contains a matching source
MAC address and source IP subnet
address.
Frame only contains a matching
source MAC address; IP address
does not match.
Frame only contains a matching IP
address; source MAC does not
match.
Frame source is assigned to the
rule’s VLAN.
Frame is blocked; its source is
not assigned to the rule’s VLAN.
Frame is blocked; its source is
not assigned to the rule’s VLAN.
10. Port-IP Address Binding Frame contains a matching source
port and source IP subnet address.
Frame only contains a matching
source IP address; port does not
match.
Frame only contains a matching
port; source IP address does not
match.
Frame source is assigned to the
rule’s VLAN.
Frame is blocked; its source is
not assigned to the rule’s VLAN.
Frame is allowed; its source is
not assigned to the rule’s VLAN.
11. Port-Protocol Binding Frame contains a matching source
port and protocol.
Frame only contains a matching
source port; protocol does not
match.
Frame only contains a matching
protocol; port does not match.
Frame source is assigned to the
rule’s VLAN.
Frame is blocked; its source is
not assigned to the rule’s VLAN.
Frame is allowed; its source is
not assigned to the rule’s VLAN.
12. MAC Address Frames contain a matching source
MAC address.
Frame source is assigned to the
rule’s VLAN.
13. MAC Range Frame contains a source MAC
address that falls within a specified
range of MAC addresses.
Frame source is assigned to the
rule’s VLAN.
Precedence Step/Rule Type Condition Result