Alcatel-Lucent 6600 Switch User Manual


 
Port Monitoring Diagnosing Switch Problems
page 27-24 OmniSwitch 6600 Family Network Configuration Guide April 2006
Displaying Port Monitoring Status and Data
A summary of the show commands used for displaying port monitoring status and port monitoring data are
given here:
For example, to display port monitoring data use the show port monitoring file command as shown
below:
-> show port monitoring file
Destination | Source | Type | Data
-------------------------------------------------------------------------------
01:80:C2:00:00:00 | 00:20:DA:8F:92:C6 | BPDU | 00:26:42:42:03:00:00:00:00:00
00:20:DA:C7:2D:D6 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:FE:4A:40:00
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:89:40:00
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:85:40:00
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:8A:40:00
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:86:40:00
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:8B:40:00
01:80:C2:00:00:00 | 00:20:DA:8F:92:C6 | BPDU | 00:26:42:42:03:00:00:00:00:00
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 | UDP | 08:00:45:00:00:6B:CF:87:40:00
Note. For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide.
show port monitoring status Displays port monitoring status.
show port monitoring file Displays port monitoring data.