Filter
Top Products
Static Link Aggregation Specifications Configuring Static Link Aggregation
page 12-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
Static Link Aggregation Specifications
The table below lists specifications for static groups.
Static Link Aggregation Default Values
The table below lists default values and the commands to modify them for static aggregate groups.
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6600
Family switches)
30
Maximum number of link aggregation groups per
OmniSwitch 6600-U24, 6600-U24, 6600-P24, or
6602-24 switch
4
Maximum number of link aggregation groups per
OmniSwitch 6648 or 6602-48 switch
8
Number of links per group supported on a single
switch
2, 4, or 8
Number of links per group supported in a stack 2, 4, 8, or 16
Range for optional group name 1 to 255 characters
CLI Command Prefix Recognition All static link aggregation configuration commands
support prefix recognition. (Static link aggregation
show commands do not support prefix recognition.)
See the “Using the CLI” chapter in the OmniSwitch
6600 Family Switch Management Guide for more
information.
Parameter Description Command Default Value/Comments
Administrative State static linkagg admin state enabled
Group Name static linkagg name No name configured