Filter
Top Products
Managing Policy Servers Verifying the Policy Server Configuration
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 23-7
Interaction With CLI Policies
Policies configured via PolicyView can only be modified through PolicyView. They cannot be modified
through the CLI. Any policy management done through the CLI only affects policies configured through
the CLI. For example, the qos flush command only removes CLI policies; LDAP policies are not affected.
Also, the policy server flush command removes only LDAP policies; CLI policies are not affected.
Note. If polices are applied from PolicyView or vice versa, it will activate all current configuration.
For more information about configuring policies through the CLI, see Chapter 24, “Configuring QoS.”
Verifying the Policy Server Configuration
To display information about authentication and policy servers, use the following commands:
show policy server Displays information about servers from which policies may be down-
loaded to the switch.
show policy server long Displays detailed information about an LDAP policy server.
show policy server statistics Displays statistics about policy directory servers.
show policy server rules Displays the names of policies originating on a directory server that
have been downloaded to the switch.
show policy server events Displays any events related to a directory server.