Filter
Top Products
Configuring IPv6 Verifying the IPv6 Configuration
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 15-15
Verifying the IPv6 Configuration
A summary of the show commands used for verifying the IPv6 configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show ipv6 interface Displays the status and configuration of IPv6 interfaces.
show ipv6 tunnel Displays IPv6 configured tunnel information and whether or not the
6to4 tunnel is enabled.
show ipv6 routes Displays the IPv6 Forwarding Table.
show ipv6 prefixes Displays IPv6 subnet prefixes used in router advertisements.
show ipv6 hosts Displays the IPv6 Local Host Table.
show ipv6 neighbors Displays the IPv6 Neighbor Table.
show ipv6 traffic Displays statistics for IPv6 traffic.
show ipv6 icmp statistics Displays ICMP6 statistics.
show ipv6 pmtu table Displays the IPv6 Path MTU Table.
show ipv6 tcp ports Displays TCP Over IPv6 Connection Table. Contains information
about existing TCP connections between IPv6 endpoints.
show ipv6 udp ports Displays the UDP Over IPv6 Listener Table. Contains information
about UDP/IPv6 endpoints.