Filter
Top Products
QoS Defaults Configuring QoS
page 24-10 OmniSwitch 6600 Family Network Configuration Guide April 2006
QoS Port Defaults
Use the qos port reset command to reset port settings to the defaults.
Policy Rule Defaults
The following are defaults for the policy rule command:
*However, policy rules configured with source and destination conditions and actions with disposi-
tion, priority, or 802.1P configured are automatically bidirectional.
Description Command/keyword Default
Whether the port is trusted or
untrusted
qos port trusted 802.1Q and mobile ports are
always trusted; other ports are
untrusted
Maximum reserve bandwidth qos port maximum reserve
bandwidth
port bandwidth; currently not
supported.
Maximum signalled bandwidth
(via RSVP)
qos port maximum signal
bandwidth
port bandwidth; currently not
supported.
Maximum default depth qos port maximum default depth 2048 bytes; currently not sup-
ported.
Maximum default buffers qos port maximum default buffers 64 buffers (ENI interfaces)
192 buffers (GNI interfaces);
currently not supported.
Description Keyword Default
Policy rule enabled or disabled enable | disable enabled
Determines the order in which
rules are searched
precedence 0
Whether or not the rule is reflex-
ive
reflexive Rules cannot be configured to be
reflexive. Reflexive rules are not
supported on the OmniSwitch
6600.
*
Whether the rule is saved to
flash immediately
save Save option is enabled.