Filter
Top Products
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 11-1
11 Configuring 802.1Q
802.1Q is the IEEE standard for segmenting networks into VLANs. 802.1Q segmentation is done by
adding a specific tag to a packet.
In this Chapter
This chapter describes the basic components of 802.1Q VLANs and how to configure them through the
Command Line Interface (CLI). CLI commands are used in the configuration examples; for more details
about the syntax of commands, see “802.1Q Commands” in the OmniSwitch CLI Reference Guide.
Configuration procedures described in this chapter include:
• Setting up an 802.1Q VLAN for a specific port. See “Enabling Tagging on a Port” on page 11-5.
• Setting up an 802.1Q VLAN for an link aggregation group. See “Enabling Tagging with Link Aggrega-
tion” on page 11-6.
• Configuring 802.1Q VLAN parameters. See “Configuring the Frame Type” on page 11-7.
For information on creating and managing VLANs, see Chapter 4, “Configuring VLANs.”
For information on creating and managing link aggregation groups, see Chapter 12, “Configuring Static
Link Aggregation” and Chapter 13, “Configuring Dynamic Link Aggregation.”