Filter
Top Products
VLAN Specifications Configuring VLANs
page 4-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
VLAN Specifications
VLAN Defaults
RFCs Supported 2674 - Definitions of Managed Objects for Bridges
with Traffic Classes, Multicast Filtering and Virtual
LAN Extensions
IEEE Standards Supported 802.1Q - Virtual Bridged Local Area Networks
802.1D - Media Access Control Bridges
Maximum VLANs per stack 4094 (including default VLAN 1)
Maximum VLAN port associations per stack 32768
Maximum IP router VLANs per stack 4094
Maximum IP router interfaces per VLAN 8
Maximum IP router interfaces per stack 4096
Maximum IPX router VLANs per stack 0 (IPX routing not supported)
Maximum Spanning Tree VLANs per switch
or stack
253
Maximum authenticated VLANs per stack 128
MAC Router Mode Supported Single
CLI Command Prefix Recognition All VLAN management commands support prefix
recognition. See the “Using the CLI” chapter in the
OmniSwitch 6600 Family Switch Management Guide
for more information.
Parameter Description Command Default
VLAN identifier (VLAN ID) vlan VLAN 1 predefined on each
switch.
VLAN administrative state vlan Enabled
VLAN description vlan name VLAN identifier (VLAN ID)
VLAN Spanning Tree state vlan stp Enabled
VLAN mobile tag status vlan mobile-tag Disabled
VLAN IP router interface ip interface VLAN 1 router interface.
VLAN authentication status vlan authentication Disabled
VLAN port associations vlan port default All ports initially associated
with default VLAN 1.