Filter
Top Products
Diagnosing Switch Problems Remote Monitoring (RMON)
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 27-29
Displaying Statistics for a Particular RMON Probe
To view statistics for a particular current RMON probe, enter the show rmon probes command,
specifying an entry number for a particular probe, such as:
-> show rmon probes 4005
A display showing statistics for the specified RMON probe will appear, as shown in the following
sections.
Sample Display for Ethernet Statistics Probe
The display shown here identifies RMON Probe 4005’s Owner description and interface location
(OmniSwitch Auto Probe on slot 4, port 5), Entry number (4005), probe Flavor (Ethernet statistics), Status
(Active). Additionally, the display indicates the amount of time that has elapsed since the last change in
status (48 hours, 54 minutes), and the amount of memory allocated to the probe, measured in bytes (275).
-> show rmon probes 4005
Probe’s Owner: Hawk Switch Auto Probe on Slot 4, Port 5
Entry 4005
Flavor = Ethernet, Status = Active
Time = 48 hrs 54 mins,
System Resources (bytes) = 275