Filter
Top Products
Applying the Configuration Configuring QoS
page 24-48 OmniSwitch 6600 Family Network Configuration Guide April 2006
Interaction With LDAP Policies
The qos apply, qos revert, and qos flush commands do not affect policies created through the Policy-
View application. Separate commands are used for loading and flushing LDAP policies on the switch. See
Chapter 20, “Managing Authentication Servers,” for information about managing LDAP policies.
Verifying the Applied Policy Configuration
The policy show commands have an optional keyword (applied) to display only applied policy objects.
These commands include:
For more information about these commands, see the OmniSwitch CLI Reference Guide.
show policy condition Displays information about all pending and applied policy conditions or
a particular policy condition configured on the switch. Use the applied
keyword to display information about applied conditions only.
show policy action Displays information about all pending and applied policy actions or a
particular policy action configured on the switch. Use the applied key-
word to display information about applied actions only.
show policy rule Displays information about all pending and applied policy rules or a par-
ticular policy rule. Use the applied keyword to display information
about applied rules only.
show policy network group Displays information about all pending and applied policy network
groups or a particular network group. Use the applied keyword to dis-
play information about applied groups only.
show policy service Displays information about all pending and applied policy services or a
particular policy service configured on the switch. Use the applied key-
word to display information about applied services only.
show policy service group Displays information about all pending and applied policy service
groups or a particular service group. Use the applied keyword to display
information about applied groups only.
show policy mac group Displays information about all pending and applied MAC groups or a
particular policy MAC group configured on the switch. Use the applied
keyword to display information about applied groups only.
show policy port group Displays information about all pending and applied policy port groups
or a particular port group. Use the applied keyword to display informa-
tion about applied groups only.
show policy map group Displays information about all pending and applied policy map groups
or a particular map group. Use the applied keyword to display informa-
tion about applied groups only.
show policy classify Sends Layer 2, Layer 3, or multicast information to the classifier to see
how the switch will handle the packet. Use the applied keyword to
examine only applied conditions.