Filter
Top Products
IPv6 Specifications Configuring IPv6
page 15-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
IPv6 Specifications
IPv6 Defaults
The following table lists the defaults for IPv6 configuration through the ip command.
RFCs Supported 2460–Internet Protocol, Version 6 (IPv6) Specification
2461–Neighbor Discovery for IP Version 6 (IPv6)
2462–IPv6 Stateless Address Autoconfiguration
2463–Internet Control Message Protocol (ICMPv6) for the
Internet Protocol Version 6 (IPv6) Specification
2464–Transmission of IPv6 Packets Over Ethernet
Networks
2893–Transition Mechanisms for IPv6 Hosts and Routers
3513–Internet Protocol Version 6 (IPv6) Addressing Archi-
tecture
3056–Connection of IPv6 Domains via IPv4 Clouds
Maximum IPv6 router VLANs per switch 4094
Maximum IPv6 interfaces per VLAN 1
Maximum IPv6 interfaces per tunnel 1
Maximum 6to4 tunnels per switch 1
Maximum configured tunnels per switch 255
Description Command Default
Global status of IPv6 on the
switch
N/A Enabled
IPv6 interfaces ipv6 interface None