Filter
Top Products
IPMS Application Example Configuring IP Multicast Switching
page 26-12 OmniSwitch 6600 Family Network Configuration Guide April 2006
5 Modify the leave timeout from its default value of 10 seconds to 120 seconds by entering:
-> ip multicast leave-timeout 120
An example of what these commands look like entered sequentially on the command line:
-> ip multicast switching
-> ip multicast static-neighbor 5 1/5
-> ip multicast static-querier 5 1/2
-> ip multicast membership-timeout 3600
-> ip multicast leave-timeout 120
As an option, you can use the show ip multicast switching, show ip multicast neighbors, and show ip
multicast queriers commands to confirm your settings as shown below:
-> show ip multicast switching
IPMS Configuration
IPMS State: Disabled
Hardware Routing: Enabled
Priority: low
Max Ingress Bandwidth: 10
Leave Timeout: 120
Flow Timeout: 64800
Membership Timeout: 3600
Neighbor Timeout: 90
Querier Timeout: 260
Other Querier Timeout: 255
Query Interval: 125
Default Proxy Version: IGMPv2
Learning Mode: buffer
-> show ip multicast neighbors
Source IP VLAN Slot/Port Expire Type Version
--------------------+----+---------+------+-------+-------
None 5 1/5 Never Static IGMPv2
->show ip multicast queriers
Source IP VLAN Slot/Port Expire Type Version
--------------------+----+---------+------+-------+--------
None 5 1/2 Never Static IGMPv2