Filter
Top Products
Learned Port Security Specifications Configuring Learned Port Security
page 3-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
Learned Port Security Specifications
Learned Port Security Defaults
RFCs supported Not applicable at this time.
IEEE Standards supported Not applicable at this time.
Ports eligible for Learned Port Security Ethernet and Gigabit Ethernet ports (fixed, mobile,
802.1Q tagged, and authenticated ports).
Ports not eligible for Learned Port Security Link aggregate ports.
802.1Q (trunked) link aggregate ports.
Minimum number of learned MAC addresses
allowed per port
1
Maximum number of learned MAC addresses
allowed per port
100
Maximum number of configurable MAC address
ranges per LPS port.
1
Maximum number of learned MAC addresses per
OmniSwitch 6600 (applies to all ports on the
switch).
32K
Maximum number of learned MAC addresses per
stack of OmniSwitch 6600 Family switches (applies
across all stack ports).
64K
Parameter Description Command Default
LPS status for a port. port-security disabled
Number of learned MAC addresses
allowed on an LPS port.
port security maximum 1
Source learning time limit. port-security shutdown disabled
Configured MAC addresses per LPS
port.
port-security mac none
MAC address range per LPS port. port-security mac-range 00:00:00:00:00:00–
ff:ff:ff:ff:ff:ff
LPS port violation mode. port-security violation restrict