Filter
Top Products
Configuring Authenticated VLANs Setting Up Authentication Clients
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 21-13
Windows 95
Install the 32-bit DLC protocol program and the update patch from the Microsoft FTP site
(ftp.microsoft.com). From the FTP site, download the MSDLC32.EXE and DLC32UPD.EXE files (or the
latest DLC protocol update). These files are self-extracting zip files. Follow these steps:
1 Double-click the MSDLC32.EXE file in the folder to which you want to download the file.
Note. Do not run MSDLC32.EXE file in the Windows or Windows/System folders. If you downloaded
the file to either of these locations, copy it to a temporary folder on your hard disk or copy it to an installa-
tion diskette before double-clicking on it.
2 From your Windows desktop, select Start > Settings > Control Panel.
3 Double-click the Network icon in the Control Panel.
4 In the Network dialog box, click on the Add button.
5 In the Select Network Component Type dialog box, double-click on the Protocol network component.
6 In the Select Network Protocol dialog box, click on the Have Disk button.
7 Specify the drive and path where the MSDLC32.EXE files (you should have already extracted them)
are located. For example, if you created an installation diskette, you would enter
<drive letter>:\
If you created a temporary folder on your hard disk, then you would enter
C:\<folder name>
where folder name is the directory or path into which you copied the MSDLC32.EXE files. Click OK.
8 Click “Microsoft 32-bit DLC”, then click OK again.
9 When prompted, insert the Windows 95 disks so that other network components can be reinstalled.
10 When prompted, shut down your computer and restart Windows 95. This restart is required for the
DLC protocol stack to load on the system.
11 Next, the DLC protocol stack update must be loaded. Double click the DLC32UPD.EXE file. The
program will install itself. After installing the update, it is recommended that the system be rebooted.
Loading the AV-Client Software
Windows 2000 and Windows NT
1 Download the AV-Client from the Alcatel website onto the Windows desktop.
2 Double-click the AV-Client icon. The installation routine begins and the following window displays: