Filter
Top Products
Diagnosing Switch Problems Switch Health Overview
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 27-11
Switch Health Defaults
The following table shows Switch Health default values.
Global Switch Health Defaults
Quick Steps for Configuring Switch Health
1 Display the health threshold limits, health sampling interval settings and/or health statistics for the
switch, depending on the parameters you wish to modify. (For best results, note the default settings for
future reference.) For example:
-> show health threshold
The default settings for the command you entered will be displayed. For example:
Rx Threshold = 80
TxRx Threshold = 80
Memory Threshold = 80
CPU Threshold = 80
Temperature Threshold = 50
2 Enter the appropriate command to change the desired health threshold or health sampling interval
parameter settings, or reset all health statistics for the switch. For example:
-> health threshold memory 85
Note. Optional. To verify the Switch Health configuration, enter show health threshold followed by the
parameter you modified (e.g., memory). The display is similar to the one shown below:
Memory Threshold = 85
For more information about this command, see “Displaying Health Threshold Limits” on page 27-35 or
the “Health Monitoring Commands” chapter in the OmniSwitch CLI Reference Guide.
Parameter Description CLI Command Default Value/Comments
Resource Threshold Limit Configuration health threshold 80 percent
Sampling Interval Configuration health interval 5 seconds
Switch Temperature health interval 50 degrees Celsius