Filter
Top Products
Diagnosing Switch Problems Port Monitoring
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 27-21
In addition, you can also specify optional parameters shown in the table below. These parameters must be
entered after the slot and port number.
For example, to configure port monitoring session 6 on port 2/3 and administratively enable it enter:
-> port monitoring 6 source 2/3 enable
These keywords can be used when creating the port monitoring session or afterwards. See the sections
below for more information on using these keywords.
Enabling a Port Monitoring Session
To disable a port monitoring session use the port monitoring source command by entering port
monitoring followed by the user-specified session ID number, source, the slot number of the port to be
monitored, a slash (/), the port number of the port, and enable. For example, to enable port monitoring
session 6 on port 2/3 enter:
-> port monitoring 6 source 2/3 enable
Disabling a Port Monitoring Session
To disable a port monitoring session use the port monitoring command by entering port monitoring
followed by the port monitoring session ID and pause. For example, to disable port monitoring session 6
enter:
-> port monitoring 6 disable
Deleting a Port Monitoring Session
To delete a port monitoring session use the no form of the port monitoring command by entering no port
monitoring followed by the port monitoring session ID. For example, tot delete port monitoring session 6
enter:
-> no port monitoring 6
Pausing a Port Monitoring Session
To pause a port monitoring session use the port monitoring command by entering port monitoring
followed by the port monitoring session ID and pause. For example, to pause port monitoring session 6
enter:
-> port monitoring 6 pause
To resume a paused port monitoring session use the port monitoring command by entering port
monitoring followed by the port monitoring session ID and resume. For example, to resume port moni-
toring session 6 enter:
-> port monitoring 6 resume
keywords
file
no overwrite
bidirectional
disable
no file
inport
timeout
size
outport
enable