Filter
Top Products
VRRP Specifications Configuring VRRP
page 19-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
VRRP Specifications
VRRP Defaults
The following table lists the defaults for VRRP configuration through the vrrp command and the relevant
command keywords:
In addition, other defaults for VRRP include:
RFCs Supported RFC 2338–Virtual Router Redundancy Protocol
RFC 2787–Definitions of Managed Objects for the Virtual
Router Redundancy Protocol
Compatible with HSRP? No
Maximum number of virtual routers 7
Maximum number of IP addresses 1 for the IP address owner; more than 1 address may be
configured if the router is a backup for a master router that
supports multiple addresses
Description Keyword Default
Virtual router enabled or dis-
abled
enable | disable | on | off Virtual routers are disabled (off).
Priority priority 100
Preempt mode preempt | no preempt Preempt mode is enabled.
Advertising interval advertising] interval 1 second
Description Command Default
VRRP traps vrrp trap Disabled
VRRP tracking vrrp track Enabled
VRRP delay vrrp delay 45 seconds