Filter
Top Products
Managing Authentication Servers Server Defaults
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 20-3
Server Defaults
The defaults for authentication server configuration on the switch are listed in the tables in the next
sections.
RADIUS Authentication Servers
Defaults for the aaa radius-server command are as follows:
* The port defaults are based on the older RADIUS standards; some servers are set up with port numbers
based on the newer standards (ports 1812 and 1813, respectively).
LDAP Authentication Servers
Defaults for the aaa ldap-server command are as follows:
Description Keyword Default
Number of retries on the server before the
switch tries a backup server
retransmit 3
Timeout for server replies to authentication
requests
timeout 2
UDP destination port for authentication auth-port 1645*
UDP destination port for accounting acct-port 1646*
Description Keyword Default
The port number for the server port 389 (SSL disabled)
636 (SSL enabled)
Number of retries on the server before the
switch tries a backup server
retransmit 3
Timeout for server replies to authentication
requests
timeout 2
Whether a Secure Socket Layer is configured
for the server
ssl | no ssl no ssl