Filter
Top Products
Chapter 5 CLI – Layer 2
82 P332G-ML User’s Guide
Example:
P330-N# clear port mirror 1/2/1/4
this command will delete the port mirror entry
- do you want to continue (Y/N)? y
Mirroring packets from port 1/2 to port 1/4 is cleared
Set Commands Summary Table
Following is a Table of the Privileged Level set commands.
• set logout Set the number of minutes before an
inactive CLI session automatically logs
out
Page 85
• set timezone Set the timezone for the system Page 85
• set time server Set the NTP server address Page 86
• set time protocol Set the time protocol for use in the
system
Page 86
• set time client Enables or disables the time client Page 86
• set ip route Add IP addresses to the IP routing table Page 87
• set snmp community Set the snmp community string for a
specific module
Page 88
• set snmp trap Set the SNMP trap of the system or add/
delete an entry into/from the SNMP
trap receiver table
Page 88
• set snmp trap auth Enable/Disable the SNMP
authentication trap
Page 89
• set snmp retries Set the number of SNMP retries Page 89
• set snmp timeout Set the SNMP timeout Page 89
• set system location Set the system location Page 90
• set system name Set the system name Page 90
• set system contact Set the system contact person Page 90
• set device-mode Set the basic mode of operation Page 91
• set interface Configure the management interface of
the device
Page 91