Filter
Top Products
Chapter 5 CLI – Layer 2
60 P332G-ML User’s Guide
Note: MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
The syntax for this command is:
show cam [<mod_num>[/<port_num>]]
Example:
P330-N> show cam 1/1
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-59-03-78 1/1
00-d0-79-0a-0a-da 1/1
00-40-0d-43-1e-e9 1/1
etc...
Show cascading fault-monitoring Command
Use the show cascading fault-monitoring command to display the status of
the fault trap sending mode for cascading links.
The syntax for this command is:
show cascading fault-monitoring [<mod_num>]
Example:
P330-N> show cascading fault-monitoring 1
Module 1 cascading-down fault monitoring enabled.
Module 1 cascading-up fault monitoring enabled.
Show port auto-negotiation-flowcontrol-advertisement Command
The show auto-negotiation-flowcontrol-advertisement command
displays the flowcontrol advertisement for a Gigabit port when performing
autonegotiation.
The syntax for this command is:
show port auto-negotiation-flowcontrol-advertisement
[<mod_num>[/<port_num>]
[module/port] module/port number