Filter
Top Products
Appendix A Embedded Web Manager
P332G-ML User’s Guide 195
Running the Embedded Manager
Note: You should assign an IP address to the switch before beginning this
procedure.
1Open your browser.
2 Enter the URL of the switch in the format http://
aaa.bbb.ccc.ddd
where
aaa.bbb.ccc.ddd
is the IP address of the switch.
Note: The user name is “root”
The default password for read-only access is “root”
The default passwords for read-write access are “enable” or “super”.
Note: The Web management passwords are the same as those of the CLI. If you
change the passwords of the CLI then use those passwords for Web management as
well.
3 The welcome page is displayed.
Figure A.1 The Welcome Page