Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 97
Set port vlan-binding-mode Command
Use the set port vlan-binding-mode command to define the binding method used
by ports.
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
Example:
P330-N# set port vlan-binding-mode 1/5-9 static
Set Port vlan binding method:1/5
Set Port vlan binding method:1/6
.
.
Set port static-vlan Command
Use the set port static-vlan command to statically assign VLANs to ports.
The syntax for this command is:
set port static-vlan [module/port range] [vlan num]
[module/port] - port range
{vlan range] - vlan to bind to port
Example:
P330-N# set port static-vlan 1/4-6 9
port list module and ports to bundle (format: module/port)
value static - t h e p o rt s u pp o r t s on ly th e VL AN a s c onf igu red per po rt
bind-to-configured - the port supports the VLANs configured
on the device
bind-to-all - the port support the whole range of VLANs on the
device