Filter
Top Products
Chapter 5 CLI – Layer 2
70 P332G-ML User’s Guide
Show ppp incoming timeout Command
Use the ppp incoming timeout command to see the amount of time in minutes
that a PPP session can remain idle before being automatically disconnected.
The syntax for this command is:
show ppp incoming timeout
Example:
P330-N> show ppp incoming timeout
PPP incoming timeout is 10 minutes
Show ppp baud-rate Command
Use the show ppp baud-rate command to display the set baud-rate.
The syntax for this command is:
show ppp baud-rate
Example:
P330-N> show ppp baud-rate
PPP baud rate is 38400
Show ppp configuration
Use the show ppp configuration command to display the ppp configuration
The syntax for this command is:
show ppp configuration
Example:
P330-N> show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 0 minutes
PPP Authentication Parameters:
------------------------------
Incoming: None