Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 49
The syntax for this command is:
show time parameters
Example:
P330-N> show time parameters
Current time: L:02:49:11 02 JAN 1999 isl
Timezone set to ’isl’, offset from UTC is 2 hours
Time-Server: 0.0.0.0
Time acquired from Time-Server: 0.0.0.0
Time protocol set to: TIME protocol
Show ip route Command
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
P330-N> show ip route
Show image version Command
Use the show image version command to display the software version of the
image on both memory banks of a specified module.
The syntax for this command is:
show image version [<mod_num>]
If no module number is specified, the image version of the all modules will be
displayed.
Example:
P330-N> show image version 1
Mod Module-Type Bank Version
------ ----------- ---- -------
Destination Gateway
----------- -----------
149.49.1.1 172.20.22.201
190.20.0.0 172.20.22.202
172.20.0.0 172.20.22.96