Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 61
Example:
P330-1(super)# show port auto-negotiation-flowcontrol-advertisement
Port 1/1 advertises no flow control capabilities.
Port 1/2 advertises no flow control capabilities.
Show trunk Command
Use the show trunk command to display VLAN tagging information of the
ports, port binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Example:
P330-N> show trunk
Port Mode Binding mode Native vlan
------ ----- ----------------------- -----------
1/1 dot1q bound to configured vlans 1
1/2 dot1q bound to all vlans 1
1/3 off statically bound 1
1/4 off statically bound 1
1/5 off statically bound 1
P330-N> show trunk 1/5
Port Mode Binding mode Native vlan Vlans allowed on trunk
------ ----- -------------- ----------- ----------------------
1/5 off statically bound 1 1
Following are the show trunk command output fields:
Field Description
Port Module and port number(s)
Mode Tag status of the port (dot1q - dot1Q tagging mode,
off - clear mode).
Binding mode Binding mode of the port
Native VLAN Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned).