Filter
Top Products
Chapter 6 CLI – Layer 3
P332G-ML User’s Guide 189
Example:
Router-N(configure)# validate-group 101
set qos policy-source Command
Use the set qos policy-source command to set the policy source. The default
policy source is policy-server.
Note: Before configuring the IP access list, you must change the policy source mode
to local.
The syntax for this command is:
set qos policy-source <source>
<source> - local | policy-server
Example:
Router-N(configure)# set qos policy-source local
set qos dscp-cos-map Command
Use the set qos dscp-cos-map command to configure the DSCP table.
The syntax for this command is:
set qos dscp-cos-map <dscp1>[-<dscp2>] <operation>
[<precedence>]
<dscp1> - dscp range min (0-63)
<dscp2> - dscp range max (0-63)
<operation> - fwd0-7 | no-change
<precedence> - mandatory | optional
Example:
Router-N(configure)#set qos dscp-cos-map 9-16 fwd3