Filter
Top Products
Chapter 5 CLI – Layer 2
112 P332G-ML User’s Guide
Set intelligent-multicast group filtering delay time Command
Use the set intelligent-multicast group-filtering-delay time
command to define group filtering time delays.
The syntax for this command is:
set intelligent-multicast group-filtering-delay time <time>
time time in seconds
Example:
P330-N> set intelligent-multicast group-filtering-delay time
20
Done!
Set security mode Command
Use the set security mode command to enable or disable MAC security at the
stack level. When enabled, the ports are secured based on their individual
configuration. When disabled, all the ports in a stack are non-secured.
The syntax for this command is:
set security mode { enable | disable }
Example:
P330-N> set security mode enable
Security mode enabled.
Note: The set security mode command does not apply to the P332G-ML and
P332GT-ML, and relates only to the other P330 modules in the stack.
Set arp-aging-interval Command
Use this command to set the arp aging interval. The MAC value for the default
gateway of ML agent in the ARP table, is deleted at the end of every aging interval.
The default value is 10 minutes.
The syntax for this command is:
set arp-aging-interval <value>
<value> - interval (minutes)