Filter
Top Products
Chapter 6 CLI – Layer 3
184 P332G-ML User’s Guide
Example:
Router-N> show dscp
Configure Mode
ip access-group Command
Use the ip access-group command to activate a specific policy list. To
deactivate the policy list, use the no version of this command.
The syntax for this command is:
[no] ip access-group <policy-list-number>[<default-action>]
Example:
Router-N>ip access-group 101
set qos trust trust-cos-dscp
DSCP Action Agg Idx Name
---- ------ ------- ----------------------------------------
0 fwd0 0 DSCP #0
1 fwd0 0 DSCP #1
2 fwd0 0 DSCP #2
3 fwd0 0 DSCP #3
4 fwd0 0 DSCP #4
5 fwd0 0 DSCP #5
6 fwd0 0 DSCP #6
7 fwd0 0 DSCP #7
8 fwd1 1 DSCP #8
9 fwd1 1 DSCP #9
10 fwd1 1 DSCP #10
...
62 fwd7 7 DSCP #62
63 fwd7 7 DSCP #63
<priority-list-number> integer (100..199)
<default-action> default-action-deny|default-action-permit