Filter
Top Products
Chapter 6 CLI – Layer 3
176 P332G-ML User’s Guide
Ip vrrp primary Command
Use the ip vrrp primary command to set the primary address that shall be
used as the source address of VRRP packets for the virtual router ID. Use the no
form of this command to return to the default primary address for the virtual router
instance. By default, the primary address is selected automatically by the device.
The syntax for this command is:
[no] ip vrrp <vr-id> primary <ip-address>
Example:
ip vrrp 1 primary 192.168.66.23
Ip vrrp override addr owner Command
Use the ip vrrp override addr owner command to accept packets
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). Use the no form of this
command to discard these packets.
The syntax for this command is:
[no] ip vrrp <vr-id> override addr owner
Example:
Router-N(config-if:marketing)# ip vrrp 1 override addr owner
vr-id Virtual Router ID (1-255)
ip-address Primary IP address of the virtual router. This address
should be one of the router addresses on the VLAN.
vr-id Virtual Router ID (1-255)