Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 123
Set radius authentication server Command
Use the set radius authentication server command to set a primary or
secondary RADIUS server IP address.
The syntax for this command is:
set radius authentication server <ip-address>
<primary|secondary>
Example:
P330-N(super)# set radius authentication server 192.168.38.12
primary
Clear radius authentication server Command
Use the clear radius authentication server command to remove a
primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]
Set radius authentication retry-time Command
Use the set radius authentication retry-time command to set the time
to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry time <time>
time retry time in seconds
ip-addr IP address of the RADIUS authentication server
primary default - Primary authentication server
secondary Secondary authentication server