Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 119
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
Example:
P330-N# copy module-config tftp c:\p332ml\switch1.cfg
192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
Copy tftp stack-config Command
Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration, via
TFTP. To use this command, you need to have an active tftp server, and to create a
file into which to download the data. If Avaya Multi-Service Network Manager is
running, an additional tftp server is not required.
Note: You should perform the nvram initialize command prior to the
copy tftp operation.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
filename file name (full path)
ip The ip address of the TFTP server
mod-num The module number
filename file name (full path)
ip The ip address of the TFTP server