Filter
Top Products
Chapter 5 CLI – Layer 2
76 P332G-ML User’s Guide
Privileged Level Commands
Following is a table of the Privileged Level commands. This level includes all the
commands from the User Level described above (see the User Level Commands
Section for a description of these common commands).
• no hostname Return the prompt to its default Page 77
• no rmon history Deletes an existing history entry Page 77
• no rmon alarm Deletes an existing alarm entry Page 77
• no rmon event Deletes an existing event entry Page 77
• hostname Displays or sets a new prompt Page 78
•clear
1
Clears current settings
(group of commands)
Page 78
•set
2
Set the module parameters
(group of commands)
Page 82
• sync time Synchronizes the time between modules Page 111
• get time Gets the time from the time server Page 114
• reset Restarts the system or a module Page 114
• nvram initialize Initialize the NVRAM to its factory
defaults
Page 115
• configure Currently not used in the Layer 2 CLI. Page 115
• rmon history Creates a history entry Page 115
• rmon alarm Creates an alarm entry Page 116
• rmon event Creates an event entry Page 117
• copy stack-config
tftp
Upload stack configuration to a file
(using tftp). The file must exist before you
Upload.
Page 117
•copy module-
config tftp
Upload module configuration to a file
(using tftp). The file must exist before you
Upload.
Page 118
• copy tftp stack-
config
Download a stack configuration file
(using TFTP) into the device
Page 119
• copy tftp module-
config
Download a module configuration file
(using TFTP)
Page 120